NORTH Sonar Carbon Fuselage

Impossibly thin. Impressively fast. We’ve reduced the thickness of the submerged portion of our new High Modulus Prepreg Carbon masts by over 15% compared to our standard Carbon masts, while also increasing both bending and torsional stiffness. The HM80 favours disciplines without wind power - prone surf, pump and downwind. The shorter chord length over the entire mast length reduces drag and increases manoeuvrability. This delivers more glide, more efficient pumping, and quicker turns. The HM85 covers all disciplines, with a focus on wing-foiling. Wind-powered disciplines require edging against the wind to create forward drive. Some of this drive comes from the front wing, and some comes from the mast. To efficiently provide this drive, the chord length in the submerged part of the mast is slightly longer. It increases near the top of the mast to maximise stiffness with no drag penalty, as this part of the mast is clear of the water once on foil. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Ventilation on the mast is now a thing of the past. We paid particular attention to this detail, so no matter the sea state, ventilation on the mast's TE is significantly reduced. The HM105 has been optimised for racing. The thickness of the submerged part of the mast is a further 1mm thinner than the HM80 and HM85, to provide maximum top-end speed. As a result this mast is not for jumping. Like the HM85, the chord length in the submerged region has been tailored to provide good upwind drive, while the chord length increases above the waterline to maximise stiffness. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Features15% thinnerIncreased bending and torsional stiffnessReduced dragHM80 for PronePump and DownwindHM85 all disciplinesHM105 optimised for kitefoiling and wingfoil racingMaterialsHigh Modulus Prepreg Carbon INCLUDES:  HM Mast (with gasket), Carbon Mast Cover, Screw Pack B3 (2x M8x25mm Cap screws with plastic washer for Carbon Fuselage and SS316 washer for Aluminium fuselage)

Our new highest quality pre-preg carbon mast delivers a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction, the refined one-piece design presents a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Features GeoLock.

The MA1050v2 is a versatile all-rounder, ideal for wingfoiling at speed, freestyle or in surf, for kite foiling and wake/boat foiling. Ideal for average-weight intermediate riders or heavier advanced riders, we’ve designed the MA1050v2 to deliver a wide speed range, with more emphasis on efficiency and top-speed, while retaining a low stall speed. Highly agile and fast-turning, the MA1050v2 maintains a locked-in feel for upwind/powered riding and ventilation-free tip-breaching so you can crank your turnsFeaturesWide speed rangePlayful and agile and fast turningExcellent top endControllable early liftEfficient glide and pumpabilityVentilation-free tip breachingWing / Kite / Wake / TowMaterialsPre-Preg CarbonTitanium Screws

M8x35 TH CS Screws with washersSonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier Sonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier models of the Sonar Carbon Fuselage do not have countersunk holes, so will require this Screw Pack B (M8x35 TH CS). Newer models of the Sonar Carbon Fuselage will have tapered countersink holes. These allow the head of a flathead screw to sit flush with the top of the fuselage. Tapered holes = Screw Pack B2. If your carbon fuselage has tapered holes (similar to your Sonar front wing), you will require the Sonar Fuselage Screw Pack B2 (M8x30 TH CSK T40 - 85009.240145). If you are wanting to attach an HM Carbon Mast to your Aluminium or earlier model carbon fuselage with straight holes, you will need Sonar Fuselage Screw Pack B3 (M8x25 TH CS). Please see the Size Chart for details. Includes: 2x M8x35 THCS T40 Screws, 2x M8 1.4x12.6OD Flat Washers

The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control. 1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim   Features Stackable to cover -0.5deg to +2.5deg of tuning Instant customisation without removing the Stabilizer Tune for different disciplines and front wings Cost-efficient foil system adjustment

The Seeker DLX is a premium floatation vest designed for adventure-seeking windsurfers and kiters. With a streamlined design, it allows for maximum mobility and features a large reflective shoulder panel, a front pocket, and rear tabs for a water pack. Meeting CE50 certification guidelines, it ensures safety during water activities, and its fold-out pocket and extra cush foam provide added convenience and comfort during downwinders. MATERIALS:Ultra-soft buoyancy foam DIMENSIONS:Youth- Chest size 76-86 cmXS-S- Chest size 86-96 cmM-L- Chest size 96-106 cmXL-XXL- Chest Size 106-116 cm3XL- Chest Size 116-132 cmFEATURES:Minimalist wind sport vest gets rid of cumbersome frillsSoft buoyancy foam keeps you afloat with comfortZippered side entry secures you in with adjustable bucklesFold out front cell phone pocketBack panel reef walker pocketReflective piping and panels for visibility in the waterFeatures rear attachment points for a hydration solutionThis vest is CE 50 certified, not USCG approved

Ideal for progressing, you’ll find the larger MAv2 Prime front wings provide a stable set-up for learning to wing foil or towing behind a boat. At a very low board speed, these front wings easily generate a great amount of lift without the need to pump. They are super stable, so you can focus more on the wing in your hands. The profile section prioritises pitch stability, early takeoffs and low stall speed. More sweep in the TE than the smaller size helps to make these big wings more manoeuvrable and easier to turn. More anhedral in the front view provides directional stability. The MA1500v2 is ideal for intermediate wingfoilers progressing from the larger sizes, and a lighter-weight (<70kg) rider could learn to wingfoil. It has the same airfoil section as the larger wings for low stall-speed and pitch stability, but a smaller area and higher aspect ratio to provide higher speed, better turning and more glide. The Prime pre-preg e-glass construction front wings are engineered from the same moulds as our carbon pre-preg front wings and deliver the same high performance, durability and impact resistance as the carbon pre-preg, at a more accessible price.FeaturesNovice or lightwind wing and boat foilingDesigned to get you up on foil faster and shorten your learning curveStable learn-to-foil setupMid-aspect shape ideal for progressing in all disciplinesGenerate lift easily without pumping  Pitch stable across the entire speed range   Impressive agility for size      Ventilation-free tip breachingHigh-performance durability and impact resistance at a more accessible pricePrime e-glass pre-preg constructed from the same moulds as carbon pre-pregMaterialsPrime Pre-Preg E-glass Construction  INCLUDED: Front Wing with Cover, Sonar Screw Pack E (M8x33)

Speed S208v2 Sonar Stabilizer The North Speed S208v2 Sonar Stabilizer is designed for maximum speed while providing the pitch stability required for powered riding. Description The S208v2 is recommended for riders pushing high speeds with faster front wings. Its foil sections are tuned for efficiency in the mid to high-speed range, while the dihedral rondure in front view provides a more locked-in feel. This can boost confidence when powered up and pushing high speeds and upwind angles. The pre-preg high modulus carbon construction ensures optimal stiffness and direct performance. Thin profile sections reduce drag, while the material properties help maintain structural integrity and rigidity. Features Designed for high-speed performance Thinner profile Higher aspect ratio Ventilation-free tip breaching Easy breach recovery Materials High Modulus Carbon Prepreg Titanium Screws Technical Specifications Size Color Product Code S208 Black 85004.260141

HIGHLIGHTS 165 x 90 bolt pattern Lightweight design Precisely CNC-machined WHAT RIDERS SAY "The tapered adaptor means a better load transfer and more direct feel. Sometimes the smallest details make the biggest difference." - Uli Sommerlatt, Foil Designer One union The Sonar Foil System is connected to the board by a lightweight CNC-machined aluminium Board Adaptor with a tapered geometry locking connection that engages with the mast. Fusing Board Adaptor and mast together to build one union for optimum load transfer and a stronger, more direct feeling and steering impulse when foiling. Incorporates a strong geometry locking connection for a more direct feel. Fits all boards with 165x90mm mounting pattern. 165 x 90 bolt pattern The Sonar Board Adaptor can be mounted to any foil board with a 165x90mm bolt pattern. Lightweight design Precisely CNC-machined 6061-T6 anodised aluminum. DETAILS GEOMETRY LOCKING CONNECTION Between Mast and Adaptor. FOIL TO BOARD MOUNTING SCREWS SUPPLIED WITH NORTH FOILBOARDS   165 X 90 BOLT PATTERN The Sonar Board Adaptor can be mounted to any foil board with a 165x90mm bolt pattern. LIGHTWEIGHT DESIGN   RUBBER GASKET   INCLUDED IN FOIL EDITION AND ALSO AVAILABLE AS A SEPARATE PIECE.   PRECISELY CNC-MACHINED 6061-T6 anodised aluminum.